ZyXEL Communications NBG-419N v2 - Page 64

Chapter 8 Router Mode
NBG-419N v2 User’s Guide
64
The following table describes the labels shown in the Status screen.
Click this button to refresh the status screen statistics.
Click this icon to see the Status page. The information in this screen depends on the device
mode you select.
Click this icon to see the Monitor navigation menu.
Click this icon to see the Configuration navigation menu.
Click this icon to see the Maintenance navigation menu.
Table 29 Status Screen Icon Key: Router Mode (continued)
ICON DESCRIPTION
Table 30 Status Screen: Router Mode
LABEL DESCRIPTION
Logout Click this at any time to exit the Web Configurator.
Device Information
Host Name This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
Firmware Version This is the firmware version and the date created.
Sys OP Mode This is the device mode (Section 6.1.2 on page 49) to which the Router is set - Router
Mode.
WAN Information
- MAC Address This shows the WAN Ethernet adapter MAC Address of your device.
- IP Address This shows the WAN port’s IP address.
- IP Subnet Mask This shows the WAN port’s subnet mask.
- Default Gateway This shows the WAN port’s gateway IP address.
- DHCP This shows the LAN port’s DHCP role - Client or Server.
LAN Information
- MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
- IP Address This shows the LAN port’s IP address.
- IP Subnet Mask This shows the LAN port’s subnet mask.
- DHCP This shows the LAN port’s DHCP role - Server or None.
WLAN Information
- WLAN OP Mode This is the device mode (Section 6.1.2 on page 49) to which the Router’s wireless LAN is set
- Access Point Mode.
- MAC Address This shows the wireless adapter MAC Address of your device.
- Status This shows the current status of the Wireless LAN - ON or OFF.
- Name (SSID) This shows a descriptive name used to identify the Router in the wireless LAN.
- Channel This shows the channel number which you select manually.
- Operating Channel This shows the channel number which the Router is currently using over the wireless LAN.
- Security Mode This shows the level of wireless security the Router is using.
- 802.11 Mode This shows the wireless standard.