Chapter 8 Router Mode
NBG-419N v2 User’s Guide
67
Wireless LAN General Use this screen to configure wireless LAN.
MAC Filter Use the MAC filter screen to configure the Router to block access to devices
or block the devices from accessing the Router.
Advanced This screen allows you to configure advanced wireless settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of Service (WMM
QoS). WMM QoS allows you to prioritize wireless traffic according to the
delivery requirements of individual services.
WPS Use this screen to configure WPS.
WPS Station Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled.
WDS Use this screen to set up Wireless Distribution System (WDS) on your
Router.
WAN Internet
Connection
This screen allows you to configure ISP parameters, WAN IP address
assignment, DNS servers and the WAN MAC address.
Advanced Use this screen to configure other advanced properties.
IGMP
Snooping
Use this screen to enable IGMP snooping if you have LAN users that
subscribe to multicast services.
LAN IP Use this screen to configure LAN IP address and subnet mask.
IP Alias Use this screen to have the Router apply IP alias to create LAN subnets.
DHCP Server General Use this screen to enable the Router’s DHCP server.
Advanced Use this screen to assign IP addresses to specific individual computers
based on their MAC addresses and to have DNS servers assigned by the
DHCP server.
NAT General Use this screen to enable NAT.
Application Use this screen to configure servers behind the Router.
Advanced Use this screen to change your Router’s port triggering settings.
DDNS General Use this screen to set up dynamic DNS.
Static Route IP Static
Route
Use this screen to configure IP static routes.
RIP Use this screen to enable RIPv1 or RIPv2, which are LAN broadcast
protocols.
Security
Firewall General Use this screen to activate/deactivate the firewall.
Services This screen shows a summary of the firewall rules, and allows you to edit/
add a firewall rule.
Content Filter Use this screen to block certain web features and sites containing certain
keywords in the URL.
Management
Bandwidth
Management
General Use this screen to enable bandwidth management.
Advanced Use this screen to set the upstream bandwidth and edit a bandwidth
management rule.
Monitor Use this screen to view the amount of network bandwidth that applications
running in the network are using.
Remote
Management
WWW Use this screen to be able to access the Router from the LAN, WAN or both.
UPnP General Use this screen to enable UPnP on the Router.
Table 31 Navigation Panel: Router Mode (continued)
LINK TAB FUNCTION
To Next Page
Loading...
