Chapter 10 WISP Mode
NBG-419N v2 User’s Guide
81
10.5.0.1 No Security
Use this screen if the access point to which you want to connect does not use encryption.
Figure 58 No Security (WISP)
The following table describes the labels in this screen.
Table 36 No Security (WISP)
LABEL DESCRIPTION
Wireless Setup
Network Name
(SSID)
Enter the name of the access point to which you are connecting.
Security
Security Mode Select No Security in this field.
Apply Click Apply to save your changes back to the Router.
Cancel Click Cancel to reload the previous configuration for this screen.
To Next Page
Loading...
