Chapter 6 Monitor
NXC Series User’s Guide
108
Figure 62 Monitor > Wireless > Station Info > Station List
The following table describes the labels in this screen.
Table 49 Monitor > Wireless > Station Info > Station List
LABEL DESCRIPTION
Hide/Show
Advanced
Settings
Click this button to display a greater or lesser number of configuration fields.
Show Filter / Hide
Filter
Click this button to show or hide the filter settings.
Station List
Enable Column
Freeze
Select the check box to freeze the first column (#) so it will be always visible when you scroll
through the list. Clear the check box to unfreeze the column.
IP Address Enter the IP address of the station you want to display. This field is case-sensitive
SSID Name Select the SSID(s) to which the stations you want to display are connected.
Security Mode Select the security mode(s) used by the stations you want to display.
Login Type Select the login method(s) used by the stations you want to display.
Associated AP Select the AP(s) with which the stations you want to display associate.
MAC Address Enter the MAC address of the station you want to display. This field is case-sensitive
Account Enter the user account name of the station you want to display. This field is case-sensitive
Band Select the frequency band used by the stations you want to display.
Search Click this to update the list of stations based on the search criteria.
Your search criteria is retained when navigating between screens.
Reset Click this to return the search criteria to the factory defaults and display all connected stations
without a filter.
Disconnect Select one or multiple stations and click this to disconnect the station(s) from the AP.
# This is the station’s index number in this list.
To Next Page
Loading...
