Chapter 24 Schedules
NXC Series User’s Guide
301
24.2.2 Add/Edit Schedule Recurring Rule
The Add/Edit Schedule Recurring Rule screen allows you to define a recurring schedule or edit an
existing one. To access this screen, go to the Schedule screen and click either the Add icon or an Edit
icon in the Recurring section.
Figure 176 Configuration > Object > Schedule > Add/Edit (Recurring)
The Year, Month, and Day columns are not used in recurring schedules and are disabled in this screen.
The following table describes the remaining labels in this screen.
Table 146 Configuration > Object > Schedule > Add/Edit (Recurring)
LABEL DESCRIPTION
Configuration
Name Type the name used to refer to the recurring schedule. You may use 1-31 alphanumeric
characters, underscores(
_), or dashes (-), but the first character cannot be a number. This value
is case-sensitive.
Date Time
Start Time Specify the hour and minute when the schedule begins each day.
Hour - 0 - 23
Minute - 0 - 59
Stop Time Specify the hour and minute when the schedule ends each day.
Hour - 0 - 23
Minute - 0 - 59
Weekly
Week Days Select each day of the week the recurring schedule is effective.
OK Click OK to save your changes back to the NXC.
Cancel Click Cancel to exit this screen without saving your changes.
To Next Page
Loading...
