ZyXEL Communications NXC5500 - Chapter 35 Shutdown; Shutdown; Overview; What You Need to Know

NXC Series User’s Guide
425
CHAPTER 35
Shutdown
35.1 Overview
Use this screen to shut down the device.
Always use Maintenance > Shutdown > Shutdown or the shutdown
command before you turn off the NXC or remove the power. Not doing
so can cause the firmware to become corrupt.
35.1.1 What You Need To Know
Shutdown writes all cached data to the local storage and stops the system processes. Shutdown is
different to reset; reset returns the device to its default configuration.
35.2 Shutdown
To access this screen, click Maintenance > Shutdown.
Figure 265 Maintenance > Shutdown
Click the Shutdown button to shut down the NXC. Wait for the device to shut down before you manually
turn off or remove the power. It does not turn off the power.
You can also use the CLI command shutdown to shut down the NXC.