Chapter 6 Monitor
NXC Series User’s Guide
109
6.16 Detected Device
Use this screen to view information about wireless devices detected by the AP. Click Monitor > Wireless >
Detected Device to access this screen.
Note: Enable Rogue AP Detection in the Configuration > Wireless > AP Management > Mgmt.
AP List > Edit AP List screen to detect other wireless devices in its vicinity. Or, if this
feature is not supported by your AP, you could also set at least one radio of the AP
connected to the NXC to monitor mode (in the Configuration > Wireless > AP
Management screen).
IP Address This is the station’s IP address. An 169.x.x.x IP address is a private IP address that means the
station didn't get the IP address from a DHCP server.
Associated AP This indicates the AP through which the station is connected to the network.
SSID Name This indicates the name of the wireless network to which the station is connected. A single AP
can have multiple SSIDs or networks.
802.1X This displays whether the station logged into the network via 802.1x authentication.
Captive Portal This displays whether the station logged into the network via the captive portal login page.
MAC Auth This displays whether the station logged into the network via MAC authentication.
Rx Rate This indicates the current data receiving rate of the station.
Tx Rate This indicates the current data transmission rate of the station.
Association Time This displays the time a wireless station first associated with the AP.
Capability This displays the supported standard currently being used by the station or the standards
supported by the station.
802.11 Features This displays whether the station supports IEEE802.11r, IEEE 802.11k, IEEE 802.11v or none of the
above (N/A).
MAC Address This is the station’s MAC address.
Security Mode This indicates which secure encryption method is being used by the station to connect to the
network.
Signal Strength This indicates the strength of the signal. The signal strength mainly depends on the antenna
output power and the distance between the station and the AP.
Channel This indicates the number of the channel used by the station to connect to the network.
Band This indicates the frequency band which is currently being used by the station.
Download This field displays the number of bytes received by the station.
Upload This field displays the number of bytes transmitted from the station.
Refresh Click this to refresh the items displayed on this page.
Table 49 Monitor > Wireless > Station Info > Station List (continued)
LABEL DESCRIPTION
To Next Page
Loading...
