Chapter 6 Monitor
NXC Series User’s Guide
86
The following table describes the labels in this screen.
6.11 AP List
Use this screen to view which APs are currently connected to the NXC. To access this screen, click
Monitor > Wireless > AP Information > AP List.
Figure 51 Monitor > Wireless > AP Information > AP List
The following table describes the labels in this screen.
Table 35 Monitor > System Status > Ethernet Neighbor
LABEL DESCRIPTION
Local
Port(Description)
This field displays the port of the NXC, on which the neighboring device is discovered.
Model Name This field displays the model name of the discovered device.
System Name This field displays the system name of the discovered device.
Firmware Version This field displays the firmware version of the discovered device.
Port(Description) This field displays the discovered device’s port which is connected to the NXC.
IP Address This field displays the IP address of the discovered device. Click the IP address to log into and
manage the discovered device using its web configurator.
MAC Address This field displays the MAC address of the discovered device.
Reset Click this button to update the information in the screen.
Table 36 Monitor > Wireless > AP Information > AP List
LABEL DESCRIPTION
Hide/Show
Advanced
Settings
Click this button to display a greater or lesser number of configuration fields.
AP List Select the type of APs you want to display.
Select All to show all kinds of APs that are currently or used to be connected to the NXC.
Select NebulaFlexPRO to show the APs that can work in Nebula cloud management mode.
Status Select the status of APs you want to display.
To Next Page
Loading...
