Chapter 28 DHCPv6
NXC Series User’s Guide
332
28.2.1 Add/Edit DHCPv6 Request Object
The Request Add/Edit screen allows you to create a new request object or edit an existing one. To
access this screen, go to the Request screen and click either the Add icon or an Edit icon.
Figure 194 Configuration > Object > DHCPv6 > Request > Add
The following table describes the labels in this screen.
Interface This field displays the interface used for each request object.
Value This field displays the value for each request object.
Table 161 Configuration > Object > DHCPv6 > Request (continued)
LABEL DESCRIPTION
Table 162 Configuration > Object > DHCPv6 > Request > Add/Edit
LABEL DESCRIPTION
Name Type the name for this request object. You may use 1-31 alphanumeric characters,
underscores(_), or dashes (-), but the first character cannot be a number. This value is case-
sensitive.
Request Type Select the request type for this request object. You can choose from DNS Server, or NTP Server.
Interface Select the interface for this request object.
OK Click OK to save your changes back to the NXC.
Cancel Click Cancel to exit this screen without saving your changes.
To Next Page
Loading...
