Chapter 30 Log and Report
NXC Series User’s Guide
378
The NXC provides a system log and supports e-mail profiles and remote syslog servers. The system log is
available on the View Log tab, the e-mail profiles are used to mail log messages to the specified
destinations, and the other four logs are stored on specified syslog servers.
The Log Settings tab also controls what information is saved in each log. For the system log, you can also
specify which log messages are e-mailed, where they are e-mailed, and how often they are e-mailed.
For alerts, the Log Settings tab controls which events generate alerts and where alerts are e-mailed.
The Log Settings Summary screen provides a summary of all the settings. You can use the Log Settings
Edit screen to maintain the detailed settings (such as log categories, e-mail addresses, server names,
etc.) for any log. Alternatively, if you want to edit what events is included in each log, you can also use
the Log Category Settings screen to edit this information for all logs at the same time.
30.3.1 Log Settings Summary
To access this screen, click Configuration > Log & Report > Log Settings.
Figure 232 Configuration > Log & Report > Log Settings
To Next Page
Loading...
