NXC Series User’s Guide
424
CHAPTER 34
Reboot
34.1 Overview
Use this screen to restart the device.
34.1.1 What You Need To Know
If you applied changes in the Web configurator, these were saved automatically and do not change
when you reboot. If you made changes in the CLI, however, you have to use the write command to
save the configuration before you reboot. Otherwise, the changes are lost when you reboot.
Reboot is different to reset; reset returns the device to its default configuration.
34.2 Reboot
This screen allows remote users to restart the device. To access this screen, click Maintenance > Reboot.
Figure 264 Maintenance > Reboot
Click the Reboot button to restart the NXC. Wait a few minutes until the login screen appears. If the login
screen does not appear, type the IP address of the device in your Web browser.
You can also use the CLI command reboot to restart the NXC.
To Next Page
Loading...
