Chapter 11 Zones
NXC Series User’s Guide
187
11.2 Zone
The Zone screen provides a summary of all zones. In addition, this screen allows you to add, edit, and
remove zones. To access this screen, click Configuration > Network > Zone.
Figure 98 Configuration > Network > Zone
The following table describes the labels in this screen.
11.2.1 Add/Edit Zone
This screen allows you to add or edit a zone. To access this screen, go to the Zone screen, and click the
Add icon or an Edit icon.
Table 81 Configuration > Network > Zone
LABEL DESCRIPTION
Add Click this to create a new, user-configured zone.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove a user-configured zone, select it and click Remove. The NXC confirms you want to
remove it before doing so.
Object References Select an entry and click Object References to open a screen that shows which settings use
the entry.
# This field is a sequential value, and it is not associated with any interface.
Name This field displays the name of the zone.
Block Intra-zone This field indicates whether or not the NXC blocks network traffic between members in the
zone.
Member This field displays the names of the interfaces that belong to each zone.
To Next Page
Loading...
