Chapter 1 Introduction
NXC Series User’s Guide
22
Figure 3 Applications: Captive Portal
The captive portal page only appears once per authentication session. Unless a session times out or a
user closes the connection, he or she generally will not see it again during the same session.
1.3.4 Load Balancing
With load balancing you can easily distribute wireless traffic across multiple APs to relieve strain on your
network. When a station becomes overloaded, it can automatically delay a connection until the client
associates with another network, or it can alternatively disassociate idle clients or those clients with
weak connections from the network.
1.3.5 Dynamic Channel Selection
The NXC can automatically select the radio channel upon which its APs broadcast by scanning the
area around those APs and determining what channels are currently being used by other devices not
connected to the network.
1.3.6 User-Aware Access Control
Set up security policies that restrict access to sensitive information and shared resources based on the
user who is trying to access it.
To Next Page
Loading...
