Chapter 8 Wireless
NXC Series User’s Guide
142
8.4.1 Add/Edit Rogue/Friendly List
Click Add or select an AP and click the Edit button in the Configuration > Wireless > Rogue AP > Rogue/
Friendly AP List table to display this screen.
Figure 76 Configuration > Wireless > Rogue AP > Rogue/Friendly AP List: Add/Edit Rogue/Friendly AP List
Each field is described in the following table.
8.5 Auto Healing
Use this screen to enable auto healing, which allows you to extend the wireless service coverage area
of the managed APs when one of the APs fails. Click Configuration > Wireless > Auto Healing to access
this screen.
Figure 77 Configuration > Wireless > Auto Healing
Table 62 Configuration > Wireless > Rogue AP > Rogue/Friendly AP List: Add/Edit Rogue/Friendly AP List
LABEL DESCRIPTION
MAC Enter the MAC address of the AP you want to add to the list. A MAC address is a unique hardware
identifier in the following hexadecimal format: xx:xx:xx:xx:xx:xx where xx is a hexadecimal number
separated by colons.
Description Enter up to 60 characters for the AP’s description. Spaces and underscores are allowed.
Role Select either Rogue AP or Friendly AP for the AP’s role.
OK Click OK to save your changes back to the NXC.
Cancel Click Cancel to close the window with changes unsaved.
To Next Page
Loading...
