ZyXEL Communications NXC5500 - Add;Edit Address Group Rule

Chapter 22 Addresses
NXC Series User’s Guide
291
Figure 168 Configuration > Object > Address > Address Group
The following table describes the labels in this screen.
22.3.1 Add/Edit Address Group Rule
The Add/Edit Address Group Rule screen allows you to create a new address group or edit an existing
one. To access this screen, go to the Address Group screen and click either the Add icon or an Edit icon.
Table 138 Configuration > Object > Address > Address Group
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The NXC confirms you want to remove it before
doing so.
Object
References
Select an entry and click Object References to open a screen that shows which settings use the
entry.
# This field is a sequential value, and it is not associated with a specific address group.
Name This field displays the name of each address group.
Description This field displays the description of each address group, if any.
Reference This field displays the number of times an object reference is used in a profile.