Chapter 14 IP/MAC Binding
NXC Series User’s Guide
202
Figure 111 Configuration > Network > IP/MAC Binding > Exempt List
The following table describes the labels in this screen.
Table 89 Configuration > Network > IP/MAC Binding > Exempt List
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Click an entry or select it and click Edit to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The NXC confirms you want to remove it before
doing so.
# This is the index number of the IP/MAC binding list entry.
Name Enter a name to help identify this entry.
Start IP Enter the first IP address in a range of IP addresses for which the NXC does not apply IP/MAC
binding.
End IP Enter the last IP address in a range of IP addresses for which the NXC does not apply IP/MAC
binding.
Apply Click Apply to save your changes back to the NXC.
To Next Page
Loading...
