Chapter 5 Dashboard
NXC Series User’s Guide
62
Station This displays the number of stations currently connected to the network through managed
APs. Click the link to go to the Monitor > Wireless > Station Info > Station List screen.
ZyMesh A ZyMesh AP is a managed APs that act as a root AP or a repeater to form a ZyMesh. This
shows the number of currently connected ZyMesh APs and the number of all ZyMesh APs.
Click the link to go to the Monitor > Wireless > ZyMesh > ZyMesh Link Info screen.
2.4G / 5G Station This displays the number of stations connecting to the 2.4 GHz and 5 GHz networks
respectively.
Top 5 Station Displays the top 5 Access Points (APs) with the highest number of station (aka wireless client)
connections.
# This field displays the rank of the AP.
AP MAC This field displays the MAC address of the AP to which the station belongs.
Max. Station
Count
This field displays the maximum number of wireless clients that have connected to this AP.
AP Description This field displays the AP’s description. The default description is “AP-” followed by the AP’s
MAC address.
Interface Status Summary
Name This field displays the name of each interface.
Status This field displays the current status of each interface. The possible values depend on what
type of interface it is.
Inactive - The Ethernet interface is disabled.
Down - The Ethernet interface is enabled but not connected.
Speed / Duplex - The Ethernet interface is enabled and connected. This field displays the
port speed and duplex setting (Full or Half).
Zone This field displays the zone to which the interface is currently assigned.
IP Addr/Netmask This field displays the current IP address and subnet mask assigned to the interface. If the IP
address is 0.0.0.0, the interface is disabled or did not receive an IP address and subnet mask
via DHCP.
IP Assignment This field displays how the interface gets its IP address.
Static - This interface has a static IP address.
DHCP Client - This interface gets its IP address from a DHCP server.
Action Use this field to get or to update the IP address for the interface.
Click Renew to send a new DHCP request to a DHCP server.
The Latest Alert Logs This section of the screen displays recent logs generated by the NXC.
# This is the entry’s rank in the list of alert logs.
Time This field displays the date and time the log was created.
Priority This field displays the severity of the log.
Category This field displays the type of log generated.
Message This field displays the actual log message.
Source This field displays the source address (if any) in the packet that generated the log.
Destination This field displays the destination address (if any) in the packet that generated the log.
Table 18 Dashboard (continued)
LABEL DESCRIPTION
To Next Page
Loading...
