ZyXEL Communications NXC5500 - Page 79

Chapter 6 Monitor
NXC Series User’s Guide
79
Figure 44 Monitor > System Status > Session Monitor
The following table describes the labels in this screen.
Table 29 Monitor > System Status > Session Monitor
LABEL DESCRIPTION
Session
View Select how you want the information to be displayed. Choices are:
sessions by users - display all active sessions grouped by user
sessions by services - display all active sessions grouped by service or protocol
sessions by source IP - display all active sessions grouped by source IP address
sessions by destination IP - display all active sessions grouped by destination IP address
all sessions - filter the active sessions by the User, Service, Source Address, and Destination
Address, and display each session individually (sorted by user).
Refresh Click this button to update the information on the screen. The screen also refreshes
automatically when you open and close the screen.
The User, Service, Source Address, and Destination Address fields display if you view all sessions.
Select your desired filter criteria and click the Search button to filter the list of sessions.
User This field displays when View is set to all sessions. Type the user whose sessions you want to view.
It is not possible to type part of the user name or use wildcards in this field; you must enter the
whole user name.
Service This field displays when View is set to all sessions. Select the service or service group whose
sessions you want to view. The NXC identifies the service by comparing the protocol and
destination port of each packet to the protocol and port of each services that is defined. (See
Chapter 23 on page 293 for more information about services.)
Source
Address
This field displays when View is set to all sessions. Type the source IP address whose sessions you
want to view. You cannot include the source port.
Destination
Address
This field displays when View is set to all sessions. Type the destination IP address whose sessions
you want to view. You cannot include the destination port.
Search This button displays when View is set to all sessions. Click this button to update the information
on the screen using the filter criteria in the User, Service, Source Address, and Destination
Address fields.
#
This field displays the index number of each active session.