Chapter 7 Monitor
UAG Series User’s Guide
111
configuration information, port status and station statistics for the connected AP. To access this
screen, select an entry and click the More Information button in the AP List screen.
Figure 77 Monitor > Wireless > AP Information > AP List > Station Count of AP
The following table describes the labels in this screen.
Table 37 Monitor > Wireless > AP Information > AP List > Station Count of AP
LABEL DESCRIPTION
Configuration
Status
This displays whether or not any of the AP’s configuration is in conflict with the UAG’s
settings for the AP.
Non Support If any of the AP’s configuration conflicts with the UAG’s settings for the AP, this field
displays which configuration conflicts. It displays n/a if none of the AP’s configuration
conflicts with the UAG’s settings for the AP.
Port Status
Port This shows the name of the physical Ethernet port on the UAG.
Status This field displays the current status of each physical port on the AP.
Down - The port is not connected.
Speed / Duplex - The port is connected. This field displays the port speed and duplex
setting (Full or Half).
PVID This shows the port’s PVID.
A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a port
so that the frames are forwarded to the VLAN group that the tag defines.
Up Time This field displays how long the physical port has been connected.
VLAN
Configuration
Name This shows the name of the VLAN.
To Next Page
Loading...
