Chapter 46 System
UAG Series User’s Guide
531
46.13 Language
Click Configuration > System > Language to open this screen. Use this screen to select a
display language for the UAG’s Web Configurator screens.
Figure 372 Configuration > System > Language
The following table describes the labels in this screen.
46.14 ZyXEL One Network (ZON) Utility
The ZyXEL One Network (ZON) utility uses the ZyXEL Discovery Protocol (ZDP) for discovering and
configuring ZDP-aware ZyXEL devices in the same broadcast domain as the computer on which
ZON is installed.
The ZON Utility issues requests via ZDP and in response to the query, the ZyXEL device responds
with basic information including IP address, firmware version, location, system and model name.
The information is then displayed in the ZON Utility screen and you can perform tasks like basic
configuration of the devices and batch firmware upgrade in it. You can download the ZON Utility at
www.zyxel.com and install it on a computer.
The following figure shows the ZON Utility screen.
Figure 373 ZON Utility Screen
Table 251 Configuration > System > Language
LABEL DESCRIPTION
Language Setting Select a display language for the UAG’s Web Configurator screens. You also need to open
a new browser session to display the screens in the new language.
Apply Click Apply to save your changes back to the UAG.
Reset Click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
