ZyXEL Communications UAG5100 - 46.6.11 Adding a MX Record; 46.6.12 Adding a DNS Service Control Rule

Chapter 46 System
UAG Series User’s Guide
500
46.6.11 Adding a MX Record
Click the Add icon in the MX Record table to add a MX record.
Figure 336 Configuration > System > DNS > MX Record Add
The following table describes the labels in this screen.
46.6.12 Adding a DNS Service Control Rule
Click the Add icon in the Service Control table to add a service control rule.
Figure 337 Configuration > System > DNS > Service Control Rule Add
The following table describes the labels in this screen.
Table 239 Configuration > System > DNS > MX Record Add
LABEL DESCRIPTION
Domain Name Enter the domain name where the mail is destined for.
IP Address/FQDN Enter the IP address or Fully-Qualified Domain Name (FQDN) of a mail server that handles
the mail for the domain specified in the field above.
OK Click OK to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving
Table 240 Configuration > System > DNS > Service Control Rule Add
LABEL DESCRIPTION
Create new
Object
Use this to configure any new settings objects that you need to use in this screen.
Address Object Select ALL to allow or deny any computer to send DNS queries to the UAG.
Select a predefined address object to just allow or deny the computer with the IP address
that you specified to send DNS queries to the UAG.
Zone Select ALL to allow or prevent DNS queries through any zones.
Select a predefined zone on which a DNS query to the UAG is allowed or denied.