ZyXEL Communications UAG5100 - 47.3.3 Edit Log on USB Storage Setting

Chapter 47 Log and Report
UAG Series User’s Guide
542
47.3.3 Edit Log on USB Storage Setting
The Edit Log on USB Storage Setting screen controls the detailed settings for saving logs to a
connected USB storage device. Go to the Log Setting Summary screen (see Section 47.3.1 on
page 537), and click the USB storage Edit icon.
Figure 378 Configuration > Log & Report > Log Settings > Edit (USB Storage)
The following table describes the labels in this screen.
Table 258 Configuration > Log & Report > Log Settings > Edit (USB Storage)
LABEL DESCRIPTION
Duplicate logs to
USB storage (if
ready)
Select this to have the UAG save a copy of its system logs to a connected USB storage
device. Use the Active Log section to specify what kinds of messages to include.
Enable log keep
duration
Select this option to have the UAG save a copy of its system logs to a connected USB
storage device on a daily basis.
Keep duration Specify how long the UAG is to keep the copy of system logs in the connected USB storage
device before discarding it.
Active Log