ZyXEL Communications UAG5100 - 35.6 User;Group Technical Reference

Chapter 35 User/Group
UAG Series User’s Guide
413
35.6 User /Group Technical Reference
This section provides some information on users who use an external authentication server in order
to log in.
Setting up User Attributes in an External Server
To set up user attributes, such as reauthentication time, in RADIUS servers, use the following
keywords in the user configuration file.
The following example shows you how you might set up user attributes in RADIUS servers.
Creating a Large Number of Ext-User Accounts
If you plan to create a large number of Ext-User accounts, you might use CLI commands, instead
of the Web Configurator, to create the accounts. Extract the user names from the RADIUS server,
and create a shell script that creates the user accounts. See Chapter 48 on page 549 for more
information about shell scripts.
Table 187 RADIUS: Keywords for User Attributes
KEYWORD CORRESPONDING ATTRIBUTE IN WEB CONFIGURATOR
type User Type. Possible Values: admin, limited-admin, pre-subscriber, dynamic-
guest.
leaseTime Lease Time. Possible Values: 1-1440 (minutes).
reauthTime Reauthentication Time. Possible Values: 1-1440 (minutes).
Figure 279 RADIUS Example: Keywords for User Attributes
type=user;leaseTime=222;reauthTime=222