Chapter 15 VPN 1-1 Mapping
UAG Series User’s Guide
228
15.2.1 The VPN 1-1 Mapping Edit Screen
Click Network > VPN 1-1 Mapping to open the VPN 1-1 Mapping > General screen. Then click
the Add or Edit icon to open the VPN 1-1 Mapping Add/Edit Policy screen where you can
configure the rule.
Figure 148 Network > VPN 1-1 Mapping > Add
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
Move To change a rule’s position in the numbered list, select the rule and click Move to display a
field to type a number for where you want to put that rule and press [ENTER] to move the
rule to the number that you typed.
The ordering of your rules is important as they are applied in order of their numbering.
# This field is a sequential value, and it is not associated with a specific entry.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
User / Group This field displays the name of the user or user group object to which this rule is applied.
Pool Profile This field displays the name of the pool profile used by this rule.
Apply Click this button to save your changes to the UAG.
Reset Click this button to return the screen to its last-saved settings.
Table 98 Configuration > Network > VPN 1-1 Mapping (continued)
LABEL DESCRIPTION
To Next Page
Loading...
