Chapter 30 IPSec VPN
UAG Series User’s Guide
341
30.2.1 The VPN Connection Add/Edit Screen
The Add/Edit VPN Connection screen allows you to create a new VPN connection policy or edit an
existing one. To access this screen, go to the Configuration > VPN > IPSec VPN > VPN
Connection screen (see Section 30.2 on page 340), and either click the Add icon or select an
entry and click the Edit icon.
# This field is a sequential value, and it is not associated with a specific connection.
Status The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is
inactive.
The connect icon is lit when the interface is connected and dimmed when it is disconnected.
Name This field displays the name of the IPSec SA.
VPN Gateway This field displays the associated VPN gateway(s).
Policy This field displays the local policy and the remote policy, respectively.
Apply Click Apply to save your changes back to the UAG.
Reset Click Reset to return the screen to its last-saved settings.
Table 155 Configuration > VPN > IPSec VPN > VPN Connection (continued)
LABEL DESCRIPTION
To Next Page
Loading...
