Chapter 30 IPSec VPN
UAG Series User’s Guide
347
30.3 The VPN Gateway Screen
The VPN Gateway summary screen displays the IPSec VPN gateway policies in the UAG, as well as
the UAG’s address, remote IPSec router’s address, and associated VPN connections for each one. In
addition, it also lets you activate and deactivate each VPN gateway. To access this screen, click
Configuration > VPN > IPSec VPN > VPN Gateway. The following screen appears.
Figure 243 Configuration > VPN > IPSec VPN > VPN Gateway
Each field is discussed in the following table. See Section 30.3.1 on page 348 for more information.
Table 157 Configuration > VPN > IPSec VPN > VPN Gateway
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify
the entry’s settings.
Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
Object Reference Select an entry and click Object Reference to open a screen that shows which settings
use the entry. See Section 10.3.2 on page 165 for an example.
# This field is a sequential value, and it is not associated with a specific VPN gateway.
Status The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is
inactive.
Name This field displays the name of the VPN gateway
My Address This field displays the interface or a domain name the UAG uses for the VPN gateway.
Secure Gateway This field displays the IP address(es) of the remote IPSec routers.
VPN Connection This field displays VPN connections that use this VPN gateway.
IKE Version This field displays what IKE version the associated VPN gateway(s) is using.
Apply Click Apply to save your changes back to the UAG.
Reset Click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
