Chapter 23 Web Authentication
UAG Series User’s Guide
280
Figure 197 Configuration > Web Authentication > Walled Garden: URL Base: Add/Edit
The following table describes the labels in this screen.
23.3.3 Domain/IP Base Screen
Use this screen to configure walled garden web site links, which use a (wildcard) domain name or
an IP address. These links will not display in the login page.
Click Configuration > Web Authentication > Walled Garden and then select the Domain/IP
Base tab to display the screen.
Table 122 Configuration > Web Authentication > Walled Garden: URL Base: Add/Edit
LABEL DESCRIPTION
Enable Select this to activate the entry.
Hide in login
page
Select this to not display the web site link in the user login screen.
This is helpful if a user’s access to a specific web site is required to stay connected but he
or she doesn’t need to visit that web site.
Name Enter a descriptive name for the walled garden link to be displayed in the login screen.
You can use up to 31 alphanumeric characters (A-Z, a-z, 0-9) and underscores (_). Spaces
are also allowed. The first character must be a letter.
URL Enter the URL of the web site.
Use “http://” or “https://” followed by up to 262 characters (0-9a-zA-Z;/?:@&=+$\.-
_!~*'()%). For example, http://www.example.com or http://172.16.1.35.
Preview Click this button to open the specified web site in a new frame.
OK Click OK to save your changes back to the UAG.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
