Chapter 1 Introduction
UAG Series User’s Guide
32
1.4.4 Tables and Lists
Web Configurator tables and lists are flexible with several options for how to display their entries.
Click a column heading to sort the table’s entries according to that column’s criteria.
Figure 9 Sorting Table Entries by a Column’s Criteria
Click the down arrow next to a column heading for more options about how to display the entries.
The options available vary depending on the type of fields in the column. Here are some examples
of what you can do:
• Sort in ascending or descending (reverse) alphabetical order
• Select which columns to display
• Group entries by field
• Show entries in groups
• Filter by mathematical operators (<, >, or =) or searching for text
Diagnostics Diagnostic Collect diagnostic information.
Packet Capture Capture packets for analysis.
Core Dump Connect a USB device to the UAG and save a process’s core dump to
the attached USB storage device if the process terminates abnormally
(crashes).
System Log Connect a USB device to the UAG and archive the UAG system logs to it
here.
Network Tool Identify problems with the connections. You can use Ping or TraceRoute
to help you identify problems.
Wireless Frame
Capture
Capture wireless frames from APs for analysis.
Packet Flow
Explore
Routing Status Check how the UAG determines where to route a packet.
SNAT Status View a clear picture on how the UAG converts a packet’s source IP
address and check the related settings.
Reboot Restart the UAG.
Shutdown Turn off the UAG.
Table 8 Maintenance Menu Screens Summary (continued)
FOLDER OR
LINK
TAB FUNCTION
To Next Page
Loading...
