ZyXEL Communications UAG5100 - 32.2.1 Add;Edit Application Patrol Profile

Chapter 32 Application Patrol
UAG Series User’s Guide
378
Figure 258 Configuration > UTM Profile > App Patrol > Profile
The following table describes the labels in this screen.
32.2.1 Add/Edit Application Patrol Profile
Use this screen to configure profile settings. Click Configuration > UTM Profile > App Patrol >
Profile, then click Add to create a new profile rule or click an existing profile and click Edit (or
double-click it) to open the following screen.
Table 167 Configuration > UTM Profile > App Patrol > Profile
LABEL DESCRIPTION
Add Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove Select an entry and click Remove to delete the selected entry.
Object Reference Select an entry and click Object References to open a screen that shows which settings
use the entry. Click Refresh to update information on this screen.
# This field is a sequential value showing the number of the profile. The profile order is not
important.
Name This displays the name of the profile created.
Description This displays the description of the App Patrol Profile.
Scan Options This field displays the scan options from the App Patrol profile.
Reference This displays the number of times an object reference is used in a profile.