ZyXEL Communications UAG5100 - 40.2.1 The Service Add;Edit Screen

Chapter 40 Services
UAG Series User’s Guide
449
Figure 302 Configuration > Object > Service > Service
The following table describes the labels in this screen.
40.2.1 The Service Add/Edit Screen
The Service Add/Edit screen allows you to create a new service or edit an existing one. To access
this screen, go to the Service screen (see Section 40.2 on page 448), and click either the Add icon
or an Edit icon.
Table 208 Configuration > Object > Service > Service
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
Object Reference Select an entry and click Object Reference to open a screen that shows which settings
use the entry. See Section 10.3.2 on page 165 for an example.
# This field is a sequential value, and it is not associated with a specific service.
Name This field displays the name of each service.
Content This field displays a description of each service.
Reference This displays the number of times an object reference is used in a profile.