Chapter 27 Printer
UAG Series User’s Guide
326
27.4 The Printer Manager Screen
Use this screen to manage and view information about the connected statement printer, such as
SP350E. Click Configuration > Printer > Printer Manager to display this screen.
Figure 231 Configuration > Printer > Printer Manager
The following table describes the labels in this screen.
Table 149 Configuration > Printer > Printer Manager
LABEL DESCRIPTION
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Note: You cannot edit an entry’s settings when the printer status is sync fail or sync
progressing.
Add to Mgnt
Printer List
Click this to add the selected printer to the managed printer list.
Discover Printer Click this to detect the printer(s) that is connected to the UAG and display the printer
information in the list below.
Note: Use the Printer > General > General Setting to manually configure a printer’s IP
address and add it to the managed printer list when the printer is not detected or
connected to the UAG.
Refresh Click this button to update the information in the screen.
# This is the index number of the printer in the list.
Registration This field displays whether the printer is added to the managed printer list (Mgnt Printer)
or not (Un-Mgnt Printer).
IPv4 Address This field displays the IP address of the printer that you configured in the Configuration >
Printer > Printer Manager screen.
Update Time This field displays the date and time the UAG last synchronized with the printer.
This shows n/a when the printer is not in the managed printer list or the printer status is
sync fail or sync progressing.
Status This field displays whether the UAG can connect to the printer and update the printer
information.
This shows n/a when the printer is not in the managed printer list.
Description This field displays the descriptive name of the printer that you configured.
Nickname This field displays the nickname of the printer that you configured.
To Next Page
Loading...
