Chapter 23 Web Authentication
UAG Series User’s Guide
278
23.3.1 General Screen
Use this screen to turn on the walled garden feature.
Note: You must enable web authentication before you can access the Walled Garden
screens.
Note: You can configure up to 20 walled garden web site links.
Click Configuration > Web Authentication > Walled Garden to display the screen.
Figure 195 Configuration > Web Authentication > Walled Garden: General
The following table describes the labels in this screen.
23.3.2 URL Base Screen
Use this screen to configure the walled garden web addresses (URLs that use the HTTP or HTTPS
protocol) for web sites that all users are allowed to access without logging in. The web site link(s)
displays in the user login screen by default.
Click Configuration > Web Authentication > Walled Garden and then select the URL Base tab
to display the screen.
Table 120 Configuration > Web Authentication > Walled Garden: General
LABEL DESCRIPTION
Enable Walled
Garden
Select this to turn on the walled garden feature.
Note: This feature works only with the web portal authentication type.
Apply Click this button to save your changes to the UAG.
Reset Click this button to return the screen to its last-saved settings.
To Next Page
Loading...
