Chapter 7 Monitor
UAG Series User’s Guide
120
The following table describes the labels in this screen.
7.19 The IPSec Monitor Screen
You can use this screen to display and to manage active IPSec SAs. To access this screen, click
Monitor > VPN Monitor > IPSec. The following screen appears. Click a column’s heading cell to
sort the table entries by that column’s criteria. Click the heading cell again to reverse the sort order.
Figure 85 Monitor > VPN Monitor > IPSec
Each field is described in the following table.
Table 44 Monitor > VPN 1-1 Mapping > Statistics
LABEL DESCRIPTION
# This field displays the rule’s index number in the list.
Status The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is
inactive.
User/Group This field displays the name of the user or user group object to which the rule is applied.
Pool Profile This field displays the name of the IP address pool profile to which the rule is applied.
Assigned/Failed/
Peak Usage
This field displays how many times the UAG applied the rule to a user successfully or
failed to apply the rule to a user. This also shows the maximum number of times the UAG
has applied the rule to a user successfully.
Table 45 Monitor > VPN Monitor > IPSec
LABEL DESCRIPTION
Name Enter the name of a IPSec SA here and click Search to find it (if it is associated). You
can use a keyword or regular expression. Use up to 30 alphanumeric and _+-
.()!$*^:?|{}[]<>/ characters. See Section 7.19.1 on page 121 for more details.
Policy Enter the IP address(es) or names of the local and remote policies for an IPSec SA and
click Search to find it. You can use a keyword or regular expression. Use up to 30
alphanumeric and _+-.()!$*^:?|{}[]<>/ characters. See Section 7.19.1 on page 121 for
more details.
Search Click this button to search for an IPSec SA that matches the information you specified
above.
Disconnect Select an IPSec SA and click this button to disconnect it.
To Next Page
Loading...
