ZyXEL Communications UAG5100 - 42.2 RADIUS Server Summary; 42.2.1 Adding;Editing a RADIUS Server

Chapter 42 AAA Server
UAG Series User’s Guide
460
•RADIUS
RADIUS (Remote Authentication Dial-In User Service) authentication is a popular protocol used
to authenticate users by means of an external or built-in RADIUS server. RADIUS authentication
allows you to validate a large number of users from a central location.
42.2 RADIUS Server Summary
Use the RADIUS screen to manage the list of RADIUS servers the UAG can use in authenticating
users.
Click Configuration > Object > AAA Server > RADIUS to display the RADIUS screen.
Figure 312 Configuration > Object > AAA Server > RADIUS
The following table describes the labels in this screen.
42.2.1 Adding/Editing a RADIUS Server
Click Configuration > Object > AAA Server > RADIUS to display the RADIUS screen. Click the
Add icon or an Edit icon to display the following screen. Use this screen to create a new RADIUS
entry or edit an existing one.
Table 217 Configuration > Object > AAA Server > RADIUS
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
Object
Reference
Select an entry and click Object Reference to open a screen that shows which settings
use the entry. See Section 10.3.2 on page 165 for an example.
# This field displays the index number.
Name This is the name of the RADIUS server entry.
Server Address This is the address of the RADIUS server.