Chapter 7 Monitor
UAG Series User’s Guide
92
•Use the Detected Device screen (Section 7.16 on page 116) to view the wireless devices
passively detected by the UAG.
•Use the Printer Status screen (see Section 7.17 on page 118) to view information about the
connected statement printers.
•Use the VPN 1-1 Mapping screen (see Section 7.18 on page 118) to view the status of the
active users to which the UAG applied a VPN 1-1 mapping rule.
•Use the VPN 1-1 Mapping > Statistics screen (see Section 7.18.1 on page 119) to display
statistics for each of the VPN 1-1 mapping rules.
•Use the VPN Monitor > IPSec screen (see Section 7.19 on page 120) to display and manage
active IPSec SAs.
•Use the UTM Statistics > App Patrol screen (see Section 7.20 on page 121) to start or stop
data collection and view virus statistics
•Use the UTM Statistics > Content Filter screen (see Section 7.21 on page 123) to start or stop
data collection and view content filter statistics.
•Use the Log > View Log screen (see Section 7.22 on page 125) to view the UAG’s current log
messages. You can change the way the log is displayed, you can e-mail the log, and you can also
clear the log in this screen.
•Use the Log > View AP Log screen (see Section 7.22.1 on page 127) to view the UAG’s current
wireless AP log messages.
•Use the Log > Dynamic Users Log screen (see Section 7.22.2 on page 129) to view the UAG’s
dynamic guest account log messages.
7.2 The Port Statistics Screen
Use this screen to look at packet statistics for each Gigabit Ethernet port. To access this screen,
click Monitor > System Status > Port Statistics.
Figure 64 Monitor > System Status > Port Statistics
To Next Page
Loading...
