ZyXEL Communications UAG5100 - 9.4.1 Add;Edit Rogue;Friendly List

Chapter 9 Wireless
UAG Series User’s Guide
145
9.4.1 Add/Edit Rogue/Friendly List
Select an AP and click the Edit button in the Configuration > Wireless > MON Mode table to
display this screen.
Figure 101 Configuration > Wireless > MON Mode > Add/Edit Rogue/Friendly
Each field is described in the following table.
Role This field indicates whether the selected AP is a rogue-ap or a friendly-ap. To
change the AP’s role, click the Edit button.
MAC Address This field indicates the AP’s radio MAC address.
Description This field displays the AP’s description. You can modify this by clicking the Edit
button.
Rogue/Friendly AP List
Importing/Exporting
These controls allow you to export the current list of rogue and friendly APs or
import existing lists.
File Path / Browse /
Importing
Enter the file name and path of the list you want to import or click the Browse
button to locate it. Once the File Path field has been populated, click Importing
to bring the list into the UAG.
Exporting Click this button to export the current list of either rogue APs or friendly APS.
Apply Click Apply to save your changes back to the UAG.
Reset Click Reset to return the screen to its last-saved settings.
Table 59 Configuration > Wireless > MON Mode (continued)
LABEL DESCRIPTION
Table 60 Configuration > Wireless > MON Mode > Add/Edit Rogue/Friendly
LABEL DESCRIPTION
MAC Enter the MAC address of the AP you want to add to the list. A MAC address is a unique
hardware identifier in the following hexadecimal format: xx:xx:xx:xx:xx:xx where xx is a
hexadecimal number separated by colons.
Description Enter up to 60 characters for the AP’s description. Spaces and underscores are allowed.
Role Select either Rogue AP or Friendly AP for the AP’s role.
OK Click OK to save your changes back to the UAG.
Cancel Click Cancel to close the window with changes unsaved.