Chapter 41 Schedules
UAG Series User’s Guide
457
41.3 The Schedule Group Summary Screen
The Schedule Group summary screen provides a summary of all groups of schedules in the UAG.
To access this screen, click Configuration > Object > Schedule >Group.
Figure 309 Configuration > Object > Schedule > Schedule Group
The following table describes the fields in the above screen.
41.3.1 The Schedule Group Add/Edit Screen
The Schedule Group Add/Edit screen allows you to define a schedule group or edit an existing
one. To access this screen, go to the Schedule screen (see ), and click either the Add icon or an
Edit icon in the Schedule Group section.
Table 215 Configuration > Object > Schedule > Schedule Group
LABEL DESCRIPTION
Configuration
Add Click this to create a new entry.
Edit
Double-click an entry or select it and click Edit to be able to modify the entry’s
settings.
Remove
To remove an entry, select it and click Remove. The UAG confirms you want to
remove it before doing so.
Object Reference Select an entry and click Object References to open a screen that shows which
settings use the entry.
# This field is a sequential value, and it is not associated with a specific schedule.
Name This field displays the name of the schedule group, which is used to refer to the
schedule.
Description This field displays the decription of the schedule group.
Members This field lists the members in the schedule group. Each member is separated by a
comma.
Reference This displays the number of times an object reference is used in a profile.
To Next Page
Loading...
