Chapter 41 Schedules
UAG Series User’s Guide
458
Figure 310 Configuration > Schedule > Schedule Group > Add
The following table describes the fields in the above screen.
Table 216 Configuration > Schedule > Schedule Group > Add
LABEL DESCRIPTION
Group Members
Name Type the name used to refer to the recurring schedule. You may use 1-31
alphanumeric characters, underscores(
_), or dashes (-), but the first character
cannot be a number. This value is case-sensitive.
Description Enter a description of the service group, if any. You can use up to 60 printable ASCII
characters.
Member List The Member list displays the names of the service and service group objects that
have been added to the service group. The order of members is not important.
Select items from the Available list that you want to be members and move them to
the Member list. You can double-click a single entry to move it or use the [Shift] or
[Ctrl] key to select multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
OK
Click OK to save your changes back to the UAG.
Cancel Click Cancel to exit this screen without saving your changes.
To Next Page
Loading...
