Chapter 23 Web Authentication
UAG Series User’s Guide
261
Figure 179 Configuration > Web Authentication: General
The following table gives an overview of the objects you can configure.
Table 115 Configuration > Web Authentication: General
LABEL DESCRIPTION
Global Setting
Enable Web
Authentication
Select the check box to turn on the web authentication feature. Otherwise, clear the check
box to turn it off.
Once enabled, all network traffic is blocked until a client authenticates with the UAG
through the specifically designated web portal or user agreement page.
Web Portal General Setting
Logout IP Specify an IP address that users can use to terminate their sessions manually by entering
the IP address in the address bar of the web browser.
To Next Page
Loading...
