Chapter 23 Web Authentication
UAG Series User’s Guide
265
23.2.2.1 Set Up User Accounts
Set up user accounts in the RADIUS server. This example uses the Web Configurator. If you can
export user names from the RADIUS server to a text file, then you might configure a script to
create the user accounts instead.
1 Click Configuration > Object > User/Group > User. Click the Add icon.
2 Enter the same user name that is used in the RADIUS server, and set the User Type to ext-user
because this user account is authenticated by an external server. Click OK.
Figure 182 Configuration > Object > User/Group > User > Add
3 Repeat this process to set up the remaining user accounts.
23.2.2.2 Set Up User Groups
Set up the user groups and assign the users to the user groups.
1 Click Configuration > Object > User/Group > Group. Click the Add icon.
2 Enter the name of the group. In this example, it is “Finance”. Then, select Object/Leo and click the
right arrow to move him to the Member list. This example only has one member in this group, so
click OK. Of course you could add more members later.
To Next Page
Loading...
