Chapter 23 Web Authentication
UAG Series User’s Guide
268
Figure 186 Configuration > Web Authentication
4 In the Web Authentication Policy Summary section, click the Add icon to set up a default policy
that has priority over other policies and forces every user to log into the UAG before the UAG routes
traffic for them.
5 Select Enable Policy. Enter a descriptive name, “default_policy” for example. Set the
Authentication field to required, and make sure Force User Authentication is selected. Select
an authentication type profile (“default-web-portal” in this example). Keep the rest of the default
settings, and click OK.
Note: The users must log in at the Web Configurator login screen before they can use
HTTP or MSN.
To Next Page
Loading...
