Chapter 23 Web Authentication
UAG Series User’s Guide
272
The following table describes the labels in this screen.
Add/Edit an Authentication Type Profile
Click the Add icon or select an entry in the Web Authentication > Authentication Type screen
and click the Edit icon to display the screen. The screen differs depending on what you select in the
Type field.
Table 117 Configuration > Web Authentication: Authentication Type
LABEL DESCRIPTION
Add Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
# This field is a sequential value, and it is not associated with a specific entry.
Name This field displays the name of the profile.
default-web-portal: the default login page built into the UAG.
Note: You can also customize the default login page built into the UAG in the System >
WWW > Login Page screen.
default-web-portal: the default user agreement page built into the UAG.
Type This field displays the type of the web authentication page used by this profile.
Web Page This field displays whether this profile uses the default web authentication page built into
the UAG (System Default Page) or custom web authentication pages from an external
web server (External Page).
Apply Click Apply to save your changes back to the UAG.
Reset Click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
