Chapter 25 Security Policy
UAG Series User’s Guide
300
Figure 212 Security Policy Example: Create an Address Object
3 Click Create new Object > Service to configure a service object for Doom (UDP port 666).
Configure it as follows and click OK.
Figure 213 Security Policy Example: Create a Service Object
4 Select From WAN and To LAN and enter a name for the security policy.
Select Dest_1 for the Destination and Doom as the Service. Enter a name and configure the
rest of the screen as follows. Click OK when you are done.
Figure 214 Security Policy Example: Edit a Security Policy
5 The security policy appears in the Security Policy summary.
To Next Page
Loading...
