Chapter 30 IPSec VPN
UAG Series User’s Guide
364
Set Up the VPN Connection that Manages the IPSec SA
1 In Configuration > VPN > IPSec VPN > VPN Connection > Add, click Create New Object >
Address to create an address object for the remote network. Set the Address Type to SUBNET,
the Network field to 172.16.1.0, and the Netmask to 255.255.255.0.
2 Enable the VPN connection and name it (“VPN_CONN_EXAMPLE”). Set VPN Gateway to Site-to-
site and select the VPN gateway you configured (VPN_GW_EXAMPLE). Set Local Policy to
LAN1_SUBNET and Remote Policy to VPN_REMOTE_SUBNET for the remote. Click OK.
To Next Page
Loading...
