Chapter 46 System
UAG Series User’s Guide
533
See Monitor > System Status > Ethernet Neighbor for information on using Smart Connect
(Link Layer Discovery Protocol (LLDP)) for discovering and configuring LLDP-aware devices in the
same broadcast domain as the UAG that you’re logged into using the web configurator.
Click Configuration > System > ZON to open this screen.
Figure 374 Configuration > System > ZON
The following table describes the labels in this screen.
Table 254 Configuration > System > ZON
LABEL DESCRIPTION
ZDP ZyXEL Discovery Protocol (ZDP) is the protocol that the ZyXEL One Network (ZON)
utility uses for discovering and configuring ZDP-aware ZyXEL devices in the same
broadcast domain as the computer on which ZON is installed.
Enable Select to activate ZDP discovery on the UAG.
Smart Connect Smart Connect uses Link Layer Discovery Protocol (LLDP) for discovering and
configuring LLDP-aware devices in the same broadcast domain as the UAG that you’re
logged into using the web configurator.
Enable Select to activate LLDP discovery on the UAG. See also Monitor > System Status >
Ethernet Discovery.
Apply Click Apply to save your changes back to the UAG.
Reset Click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
