ZyXEL Communications UAG5100 - Page 570

Chapter 49 Diagnostics
UAG Series User’s Guide
570
Figure 401 Maintenance > Diagnostics > Wireless Frame Capture > Capture
The following table describes the labels in this screen.
Table 273 Maintenance > Diagnostics > Wireless Frame Capture > Capture
LABEL DESCRIPTION
MON Mode APs
Configure AP to
MON Mode
Click this to go the Configuration > Wireless > AP Management screen, where
you can set one or more APs to monitor mode.
Available MON
Mode APs
This column displays which APs on your wireless network are currently configured
for monitor mode.
Use the arrow buttons to move APs off this list and onto the Captured MON Mode
APs list.
Capture MON Mode
APs
This column displays the monitor-mode configured APs selected for wireless frame
capture.
Misc Setting
File Size Specify a maximum size limit in kilobytes for the total combined size of all the
capture files on the UAG, including any existing capture files and any new capture
files you generate.
Note: If you have existing capture files you may need to set this size larger or delete
existing capture files.
The valid range is 1 to 50000. The UAG stops the capture and generates the capture
file when either the file reaches this size.
File Prefix Specify text to add to the front of the file name in order to help you identify frame
capture files.
You can modify the prefix to also create new frame capture files each time you
perform a frame capture operation. Doing this does no overwrite existing frame
capture files.
The file format is: [file prefix].cap. For example, “monitor.cap”.