Chapter 7 DASHBOARD
XGS2220 Series User’s Guide
118
Figure 82 DASHBOARD (example PoE model)
The following table describes the labels in this screen.
Table 33 DASHBOARD
LABEL DESCRIPTION
Pause Auto
Refresh
The DASHBOARD screen automatically refreshes every 30 seconds.
Click this to disable the auto refresh. Click Resume Auto Refresh to enable.
Port Status This displays individual port type, status, and connection speed of the Switch.
Click on a port to open the port’s status panel. Use the status panel to enable/disable a port
and view its basic information. For example, link speed and port utilization.
Note: The port status may vary for non-PoE and PoE models.
System Information
System
Name
This field displays the name used to identify the Switch on any network.
System
Location
This field displays the geographic location name you set for the Switch.
Boot Version This field displays the version number and date of the boot module that is currently on the
Switch.
ZyNOS F/W
Version
This field displays the version number and date of the firmware the Switch is currently running.
System Time This field displays the current date and time in the UAG. The format is mm/dd/yyyy hh:mm:ss.
System
Uptime
This field displays how long the Switch has been running since it last restarted or was turned on.
Serial
Number
This field displays the serial number of this Switch. The serial number is used for device tracking
and control.
Hardware
Version
This field displays the hardware version of the Switch.
System MAC
Address
This field displays the MAC address of the Switch.
Registration
MAC
Address
This is the MAC address reserved for NCC registration. Use this MAC address to register the Switch
on NCC.
To Next Page
Loading...
