ZyXEL Communications XGS2220 Series - 70.3 BPDU Guard Setup

Chapter 70 BPDU Guard
XGS2220 Series User’s Guide
475
The following table describes the fields in the above screen.
70.3 BPDU Guard Setup
Use this screen to turn on the BPDU guard feature on the Switch and ports.
Click SECURITY > BPDU Guard > BPDU Guard Setup to display the configuration screen as shown.
Figure 350 SECURITY > BPDU Guard > BPDU Guard Setup
The following table describes the fields in the above screen.
Table 270 SECURITY > BPDU Guard > BPDU Guard Status
LABEL DESCRIPTION
BPDU guard global
setup
This field displays whether BPDU guard is activated on the Switch.
Port This field displays the port number.
Active This shows whether BPDU guard is activated on the port.
Status This shows whether the port is shut down (Err-disable) or able to transmit packets
(Forwarding).
Table 271 SECURITY > BPDU Guard > BPDU Guard Setup
LABEL DESCRIPTION
Active Enable the switch button to enable BPDU guard on the Switch.
Port This field displays the port number.