ZyXEL Communications XGS2220 Series - Add;Edit a Static VLAN

Chapter 56 VLAN
XGS2220 Series User’s Guide
372
The following table describes the related labels in this screen.
56.4.1 Add/Edit a Static VLAN
Use this screen to configure a static VLAN for the Switch. Click Add/Edit, or select an entry and click
Add/Edit in the SWITCHING > VLAN > VLAN Setup > Static VLAN screen to display this screen.
Figure 271 SWITCHING > VLAN > VLAN Setup > Static VLAN > Add/Edit
The following table describes the related labels in this screen.
Table 199 SWITCHING > VLAN > VLAN Setup > Static VLAN
LABEL DESCRIPTION
VID This field displays the ID number of the VLAN group.
Active This field indicates whether the VLAN settings are enabled or disabled.
Name This field displays the descriptive name for this VLAN group.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Add/Edit Click Add/Edit to add a new static VLAN or edit a selected one.
Delete Click Delete to remove the selected static VLAN.
Table 200 SWITCHING > VLAN > VLAN Setup > Static VLAN > Add/Edit
LABEL DESCRIPTION
Active Enable the switch button to activate the VLAN settings.
Name Enter a descriptive name for the VLAN group for identification purposes. This name consists of up
to 64 printable ASCII characters. The string should not contain [ ? ], [ | ], [ ' ], [ " ] or [ , ].