Chapter 78 MAINTENANCE
XGS2220 Series User’s Guide
544
To access this screen, click MAINTENANCE > Configuration > Backup Configuration in the navigation
panel.
Figure 402 MAINTENANCE > Configuration > Backup Configuration
Follow the steps below to back up the current Switch configuration to your computer in this screen.
1 Select which Switch configuration file you want to download to your computer.
2 Click Backup.
3 If the current configuration file is open and/or downloaded to your computer automatically, you can
click File > Save As on your computer to save the file to a specific place.
If a dialog box pops up asking whether you want to open or save the file, click Save or Save File to
download it to the default downloads folder on your computer. If a Save As screen displays after you
click Save or Save File, choose a location to save the file on your computer from the Save in drop-down
list box and type a descriptive name for it in the File name list box. Click Save to save the configuration
file to your computer.
78.10 Auto Configuration
The Switch can download an pre-saved auto configuration file automatically when you reboot the
Switch using the DHCP or HTTPS mode. This will overwrite the running configuration stored in the Switch’s
RAM instead of the startup configuration stored in the Switch’s flash memory.
To access this screen, click MAINTENANCE > Configuration > Auto Configuration in the navigation panel.
Figure 403 MAINTENANCE > Configuration > Auto Configuration
To Next Page
Loading...
